VC升级两种方法.docxVIP

Virtual Connect升级几种方法目录一．通过Firmware DVD光盘升级21.下载FW DVD9.20B22.使用工具（HP USB Key Utility）把 Firmware DVD做成USB Key23.COPY24.把笔记本连上OA,且把做好的USB key查到笔记本35.运行Autorun3二．通过Virtual Connect Support Utility工具升级161．下载VC FW162．下载Virtual Connect Support Utility163．先安装Virtual Connect Support Utility164．打开软件16一．通过Firmware DVD光盘升级Installation Notes for using the component with HP Smart Update Manager and the Smart Update Firmware?DVD下载FW DVD9.20B Obtain the latest version of the /country/us/en/support.html?pageDisplay=driversSmart Update Firmware DVD. 使用工具（HP USB Key Utility）把 Firmware DVD做成USB Key/country/us/en/support.html?pageDisplay=driversHP USB Key Utility. (/bizsupport/TechSupport/SoftwareDescription.jsp?lang=encc=usprodTypeId=15351prodSeriesId=3884319prodNameId=3884320swEnvOID=1005swLang=13mode=2taskId=135swItem=MTX-3a87c15fff7048979ec74975e6/bizsupport/TechSupport/SoftwareDescription.jsp?lang=encc=usprodTypeId=15351prodSeriesId=3884319prodNameId=3884320swEnvOID=1005swLang=13mode=2taskId=135swItem=MTX-3a87c15fff7048979ec74975e6 ) COPYPlace this component in the directory, /hp/swpackages on the USB key. 拷贝cp013898.exe (120 MB)到/hp/swpackages目录下，不需要解压把笔记本连上OA,且把做好的USB key查到笔记本Place the USB key in a system which is on the same?network as the HP BladeSystem c-Class Virtual Connect module to be updated. 在本实验环境中，直接将OA介入到公司网络，4Gb的U盘插到笔记本上，接入公司网络 运行AutorunRun Autorun on the Smart Update Firmware?DVD from the USB key. 直接在本机运行AutorunSelect the Firmware Update tab. 见以下实验步骤。Click the Install Firmware link to launch the HP Smart Update Manager. Follow the GUI to install the firmware on the Virtual Connect module.实验之前，曾经通过VC的管理界面直接升级，3.10的报错，3.15的长时间没有响应。通过VC管理界面，选择本地的Bin文件升级。提示文件太大，无法处理以下是本次实验过程：1、本机打开U盘，找到H:\HPFWUP920\autorun.cmd2、单击Start Inventory3、按照如图标记选择4、输入VC的地址段单击Search5、找到对应的VC? IP地址，单击下一步6、输入VC的管理员帐户，密码7、开始检查8、提示需要OA的授权访问9、输入OA的账户密码需要补充一点的是，在实验过程中，由于网络环境的原因，多次报错，最后是将U盘安装在DL165G7服务器，通过LO共享，同时在公司网络内获得网卡IP地址，再进行刷新。刷新成功！查看升级日志！二．通过Virtual Connect Support Utility工具升级1．下载VC FWHP BladeS