建筑工程英标规范(钢筋)中英文.docVIP

SECTION 1: REFORCEMENT 第一章：钢筋 PART 1 GENERAL第一节 总则 1.1 SCOPE OF WORK 工作范围 Materials and labours required for the complete installation of the work of this section, including furnishing and placing of reinforcing steel and related positioning. 完成安装本部分工程所需的材料和劳动力，包括提供和设置钢筋和有关的定位。 1.2 STANDARDS 标准 Except as otherwise specified herein, perform work in accordance with specifications, codes, and standards cited therein, and latest applicable addenda and supplements. Copies of these items shall be kept available in shop and field. 除非另有规定，按照以下引用的规范，标准和必威体育精装版的附录和补充施工。在车间和现场应备有这些文件的复印件。 BS 4449 Hot rolled steel bars for the reinforcement of concrete. 用于混凝土的热轧钢筋 BS 8110 The Structural Use of Concrete - Part 1 Design and Construction. 混凝土的结构用途-第一节 设计和施工 BS 4483 Steel fabric for the reinforcement of concrete. 混凝土加筋钢丝 BS 4466 Bending dimensions and scheduling of bars for the reinforcement of concrete. 混凝土钢筋弯曲尺寸和加工表 UK Structural Design Standards specified herein can be substituted by other Structural Design Standards: Selected National and International Title and Sources, provided that request for substitution is made and reviewed by Engineers Representative before use in project. 如果在使用前提出申请替换，并经监理代表批准，可以使用相应结构设计标准：挑选的国家和国际名称和来源，来替换这里规定的英国结构设计标准。 Any material or operation specified by reference to published specifications of manufacturer or published standard shall comply with said specification or standard. In case of conflict between referenced specifications, most stringent requirement shall govern; and in case of dispute, the Engineer’s decision shall be final. In case of conflict between referenced specifications and Project Specifications, Project Specifications shall govern. 任何通过参考出版的制造商规范或标准规定的材料或实施应符合上述规范或标准。当参考规范存在分歧时，应使用最严格的要求；如果有分歧，监理的决定将是最终的。如果参考的标准和项目规范 发生分歧，应以项目规范为准。 1.3 SUBMITTALS TESTING 提交和试验 The Contractor shall submit manufacturers specifications and installation instructions for each item of proprietary material used, and shall confirm his