kV()架空线路设计(大学设计).docVIP

**大学成人高等教育 毕业设计 题目 220kV***----***架空送电线路设计 姓名与学号 指导教师 年级与专业形式 所在学院 摘 要 根据省电力公司电力系统规划设计，拟在新建一条220kV架空送电线路向变电站供电。本设计按照工程设计要求、以及标准设计流程，并根据电压等级、导地线型号、气象条件、地形情况，完成如下设计内容：计算导地线应力弧垂，绘制成图；选择直线塔和转角塔，确定杆塔呼称高、金具和绝缘子型号数量；制作弧垂模板，在平断面图上反复排杆定位，选择最佳方案；校验杆塔荷载和基础稳定；最后进行了导、地线的防振设计。 设计成果包括说明书、计算书各一份，均详细记录了本设计的计算公式、推理过程、列出了详细的设计内容、注意事项等，并在附录中给出了相关设计图纸。 220kV线路Abstract According to the system layout of **** Electric Power Company, there is a 220kV overhead power transmission line to be built from **** Substation to ****Substation. Besides engineering design request and the standard design process, this paper mainly include following task in term of the voltage rank, the type of conductor and ground wire, the condition of weather and landform. Firstly, we calculate the stress of the wires, and draw out its chart. Secondly, we choose the type of straight line tower and the corner tower, ulteriorly confirm towers height, the type and amount of insulators and fittings. Thirdly, we repetitiously arrange the tower position on the plane cross section by the template of arc sag. Fourthly, we check the load of towers and the stability of tower foundation. Finally, we design the shockproof of conductor and ground wire. The achievements in this paper includes the instruction the book and the account book, in which the formulas and its application are detailedly recorded, in which the design content and points for attention are concretely listed also. Deservedly, the drawings in the appendix belong to the part of the achievements in this paper also. Key Words 220kV overhead transmission line, the calculation of stress and the sag height , arrange the tower position 目 录 第1章 绪论……………………………………………………….…………………1 1.1概述…………………………………………………………….…….……..………1 1.2 设计现状、意义……………………………………………….…….……..………2 第2章 设计内容说明书………………………………………….…….……..………3 2.1线