对于论文翻译.doc

　　对于论文翻译 对于论文翻译 导读：论文翻译 《专业英语》课程论文 （工业工程1 ） 棘广赞 311102020211 李 凯 311102020212 李林伟 311102020213 李云龙 311102020214 教师：李发权 2014年 11 月 23 日 1 2 Introduction to Predetermined Time Systems Another industrial engineering pioneer—Frank B. Gilbreth is the inventor of motion study. He classified the basic motions into ost Gilbreth spelled backined time systems. Since 1945,there has been a grootion time as a method establishing rates quickly and accuray e study. An American engineer, A. B. Segur first took the time study into the motion study in 1924.In his paper ,Motion Time Analysis ,he e of all the skilled people doing a piece of basic motion erican Radio pany, created (aynard, G. J. Stegemerten and J. L. Sckerican ethod Time Measurement(MTM). In 1966,an Australian, DR. G. C. Heyde created Modular Arrangement 3 4 5 6 7 8 9 对于论文翻译 导读：论文翻译of Predetermined Time Standard (MOD) through long time study. The Characteristics of Predetermined Time Systems Determine the standard time in advance and objectively in easurements ance rating. (2) Record the operational e of each basic motion .Therefore, the operational improvement can be done through analysis. (3) Determine the standard time before the e values must be altered. Hoain in the same. (5) It is the best ined time systems. There are over 50 predetermined time systems being used at present in the required the specialized training to the practical applications of these techniques. Here, e typical and popular systems. Such as e Measurement, and Modular Arrangement of Predetermined Time Standard. The Method of ethod of ined time systems. It determines e based on 3 4 5 6 7 8 9 对于论文翻译 导读：论文翻译 the motion features and conditions through the specified time values in advance. In the method of otion time.(1)otion ,otion distance,(3)the gravitation or resistance overe otion ,and (4)adjustment by human beings (including stop, guidance of direction ,specially care of ,and direction change).Because t