汽车资料（Automotive Information）.docVIP

汽车资料（Automotive Information） Senior Engineer (a) the correct judgment to determine the problem please tick wrong X. 1. Guangzhou Honda electric 2.3L sedan engine adopts VTEC mechanism: () 2. fresh air inlets of cars and vans are located at the front of the car. This position is in the negative pressure zone. () 3., automobile air conditioning independent heat source heating system is divided into gas, warm, plumbing two 4. for the carburetor type engine air conditioning system can not speed up the air-conditioning control. () 5. when installing the automotive air conditioning condenser, the gaseous refrigerant output from the compressor must enter from the lower entrance of the condenser. () 6.. The evaporator structure of the automobile air conditioner is similar to that of the condenser. It is composed of an aluminum core tube and a heat sink. () 7. the refrigerant flowing from the expansion valve of the automobile air conditioner is a low pressure gas. () 8. at present, most of the air conditioning systems are vertical reciprocating compressor and swash plate compressor. () 9. automotive air conditioning refrigeration system is mainly composed of compressors, refrigerants, condensers, evaporators and hydraulic regulators. 10. one of the characteristics of the Simpson type automatic transmission planetary gear transmission mechanism is that the front planet and the rear sun wheel are connected as one The utility model is connected with the output shaft. () 11. automatic transmission hydraulic torque converter locking clutch function is to prevent automatic transmission slipping. () 12. modern electronic automatic transmission still retains governor. () 13. automotive hydraulic transmission torque converter has the function of reducing speed and increasing torque. () 14. automotive ABS system, the role of the pump is to build energy storage pressure. () 15. Honda car ABS control hydraulic oil and brake fluid are interlinked. () 16. vehicle ABS system can effectivel