板材的品种（Plate varieties）.docVIP

板材的品种（Plate varieties） First, the variety of wood boards 1, solid wood board As the name suggests, the solid wood board is made of wood made from wood. These boards are durable and natural in texture and are among the best in the decoration. But because of the high cost of this kind of plate and the high requirement of construction technology, it is not used in the decoration. Solid wood board in accordance with the general classification of the actual name of the plate, there is no uniform standard specifications. 2, plywood Plywood, also known as plywood, the line is commonly known as fine core board. Made of three or more layers of a single sheet of a millimeter thick veneer or glued. Handmade furniture is the most commonly used materials. Plywood is generally divided into 3 plates, 5 pct plates, 9 CR plates, 12 CR plates, 15 CR plates and 18 PCT plates, six specifications (1 PCT for 1mm). 3, decorative panel Decorative panels, commonly known as panels. The utility model is a decorative board made of a solid wood board, which is planed to be cut into a thin veneer with a thickness of 0.2mm or so, and is made of plywood as a base material and made by adhesive process. It is a special way for plywood to exist, with a thickness of 3 PCT. Decorative panel is a kind of advanced decoration material which is different from the practice of mixing oil. 4. Blockboard Blockboard, the line is commonly known as large core board. The large core plate is made of two pieces of veneers which are glued and spliced together in the middle. The price of the core plate is cheaper than that of the core plate, and its vertical (to the core material to differentiate), flexural strength is poor, but the lateral flexural compressive strength is higher. 5 Particleboard Particleboard is a kind of thin sheet made of wood particles as the main raw material and then added with glue and additives. Pressing method can be divided into two types: extruded particleboard and flat pressed particleboar