接发球技术（Service skill）.docVIP

接发球技术（Service skill） The receiving technique.Txt I envy some of the old people who envy them hand in hand until the end.. - pay the bill when they found themselves so valuable. Whether the service is correct or not directly influences the way of receiving service and the success of receiving service. In order to judge the rotating nature, rotation strength and the landing point of the ball, a variety of information should be used for comprehensive analysis. 1, on the other side of the service position, decided to receive service position. 2. Observe the direction of the shot before the opponent serves. 3. Observe the direction of the ball when the racket touches the ball in an instant, and judge the rotation property of the ball. 4. Observe the swing of arm and the size of the wrist when serving, judge the point of fall and the strength of the rotation. 5, according to the first point of service to determine the length of the ball. 6, according to the ball in the air to determine the rotation of the arc. 7, according to the hand to judge the ball rotation. 8. Remember the color and performance of different performance rackets. The concrete application of receiving service technique: 1. Catch the ball The topspin, acute left Mobile ball should not be too large, can be used to turn back, or general use backhand backhand block attack back then. Use the forehand fast belt and fast break to return the ball on the right. The emergency push or backspin ball, tapping the ball back, should make the film surface to increase the force to back later. Loop back then, should increase the upward pulling force. When using the ball back, first back a little, the racquet face angle should not be too big, the middle and lower part of the ball down force to offset the ball forward force. 2, take back spin When using the ball back, pay attention to the back of the racket to increase the force on the front. Pull the attack or loop back then, we must increase the upward pulling force. 3,