石材工艺（Stone craft）.docVIP

石材工艺（Stone craft） Construction technology of stone dry hanging About the content of construction process knowledge Find out more about the construction process knowledge forum 1.1.1 process flow Scaffolding, steel production and installation, the bomb line, stone installation (including installation and other work telescopic head) to remove seam sealing glue, surface cleaning, scaffolding. 1.1.2 bullet wire: 1.1.2.1 wall dry hanging elastic wire (1) considering the characteristics of the dry wall hanging stone construction, together with the decoration requirements of the ground, wall and stone modulus, the requirements of the reference line for the decorative line of the decoration project should be one-dimensional and accurate. (2) the level reference points provided by the owners are checked, and if there is no error, this can be taken as the basic level. (3) according to the determined axis, pops up both sides of the granite side line. (4) according to the original vertical and horizontal axis, the granite branch line shall be ejected, and the error between each 2 axes shall be adjusted within the scope of this paragraph. (5) in order to facilitate horizontal control, the standard high-speed line can be released on each floor. It is used for the elevation control of the steel frame installation. (6) according to the vertical line of granite on the surface of the slab, the vertical line of the granite line is the vertical line of the granite, that is, the position line of each steel frame. (7) the vertical stone partition line is ejected during the installation of the steel frame. 1.1.2.2 staircases and post shells (1) according to the determined horizontal elevation reference point, bomb control line. (2) according to the granite plate arrangement finish lines and horizontal dividing line in the granite floor pop-up granite. (3) according to the design specifications of the stone, the vertical line of position angle iron wire. (4) the vertical stone partition li