Scaffold Erecting and Dismantling Procedure（支架安装和拆除过程）.pdfVIP

ENVIRONMENT, SAFETY, HEALTH, AND QUALITY DIVISION Chapter 15: Ladder and Scaffold Safety Scaffold Erecting and Dismantling Procedure Product ID: 521 | Revision ID: 1543 | Date published: 20 September 2013 | Date effective: 20 September 2013 URL: /esh/eshmanual/references/scaffoldProcedErectDismant.pdf 1 Purpose The purpose of this procedure is to ensure scaffolding is adequate for the work to be performed and properly erected and dismantled. It covers selecting, erecting, and dismantling all types of scaffolds. It applies to workers, supervisors, scaffold qualified persons, scaffold custodians, and Facilities. 2 Procedure Step Person Action Scaffold Request 1. Requester Contacts a scaffold qualified person for assistance (Competent and Qualified Persons and Engineers) 2. Scaffold qualified person  Assists the requester in determining the best method of accessing the work area based on the work to be performed and the location of the work  Determines the need to screen the platform area based on the work being performed, vehicle or personnel traffic, and other conditions  Requests the assistance of a fall protection competent or qualified person if needed due to the work location, restrictions in the area or building the work is located in, and choice of fall protection 3. Requester If a scaffold is to be used:  If requester has an approved standard system scaffold goes to step 6  Otherwise, submits a Facilities Service Desk request by using the Facilities