Sample Drawing Package for One and Two （抽样方案1和2）.pdfVIP

Sample Drawing Package for One and Two Family Dwelling Applications For a full list of submission requirements, refer to the relevant checklist for your application found on our website: http://vancouver.ca/home-property-development/application-forms-and-checklists.aspx Common checklists for 1 2 Family Dwellings: • New construction – Outright One or Two Family Dwelling • Addition/Renovation/Alteration - One Family Dwellings in RS Zones • Decks in RS Zones Please note: The drawings contained in this document are to be used as examples only. DOC/2012/082228 Updated September 2012 General notes: Pencil drawings or notations are not acceptable. ** Ensure that an area 8 x 11.5 is left blank on the site plans for the Engineering Dept. sticker ** Calculations of Energy Utilization must be provided for all new house applications. Spatial Separation Calculations must be provided with the drawings, as well as Floor Space Ratio Statement (above grade FSR and maximum). A Site Coverage Statement must be provided as well as an Impermeable Material Site Coverage Statement with a detailed breakdown, if the building is located in a Zoning District that requires it. If the building site is located in a known peat bog area or in an area where the soil is subject to liquefaction due to an earthquake or in a flood plain area, a soils report from a Geotechnical Engineer is also required, stating the soil type and conditions as well as a recommendation of the type of foundations, footings and excavation details required for that particular site. Signed sealed B1/B2 letters of assurance for Geotechnical items must accompany the soils report. A signed statement from the Structural Engineer must on the B1/B2 letter, (or a separate letter signed and sealed by the Professional Engineer) indicating that he has read the Geotechnical report and that the building has been de