Line Replacement Product Manual Hills Home（行替换产品手册山回家）.pdfVIP

Rotary Folding Hoists Polycore Line Replacement Product Manual 70m of grey Polycore line Suitable for the following Hills branded Rotary Clothesline models: Foldaline 1 Foldaline II Foldaline 11A Foldaline Prewired Foldaline Prewired with Line Tensioning Foldaline Compact Foldaline Standard 52 Drymaster 32 Drymaster 42 Courtyard Compact Villa Everyday Villa Family Villa Deluxe Villa Deluxe Plus Traditional 42 Rotary 400 Rotary 450 Rotary 500 Rotary 6 Rotary 7 Rotary 8 Rotary 6 Premium Rotary 7 Premium Rotary 8 Premium Everyday Villa 37 Everyday Villa 47 Foldaline 1, 11 and 11A Models Step 1 – Installing New Line 1.1 Open up the Hoist and lock into position. 1.2 Remove the old polycore line from your clothesline. 1.3 Unwind the replacement line and lay out on the ground to prevent tangles. 1.4 Thread the line through the four end caps as shown in Fig. 1 and cut off leaving 200mm each end to tie off at point A. 1.5 Pull the line tight and ensure that the arms are square to each other before tying off as per Fig. 2. A Cut line, leaving Fig. 1 200mm each Fig. 2 Line from B end for tying off Arm A See Fig. 3 B D Line from D End cap See Fig. 3 C 1.6 Cut two pieces of line 300mm long from the coil. Fig. 3