LevelRite（LevelRite）.pdfVIP

1003 Level-Rite Congratulations— your new Air Helper Springs are quality Important! products capable of improving the handling and comfort DO NOT COMPRESS SHOCK MORE THAN 1 INCH of your vehicle. As with all products, proper installation is PRIOR TO DURING INSTALLATION! the key to obtaining all of the benefits your kit is capable of delivering. Please take a few minutes to read through For your safety and to prevent possible damage to your the instructions to identify the components and learn vehicle, do not exceed the maximum load recommended where and how they are used. It is a good idea to start by the vehicle manufacturer (GVWR). Although your Air by comparing the parts in your kit with the parts list below. Helper Springs are rated at a maximum inflation pressure Be sure to take all applicable safety precautions dur- of 100 psi, this pressure may allow you to carry too great ing the installation of the kit. The instructions listed in this a load on some vehicles. It is best to have your vehicle brochure and the illustrations all show the left, or driver’s weighed once it is completely loaded and compare that side of the vehicle. To install the right side assembly simply weight to the maximum allowed. Check your vehicle owner’s follow the same procedures. manual or data plate on driver’s side door for maximum Your kit includes separate inflation valves and air lines loads listed for your vehicle. for each air helper spring. This will allow you to level your