Instruction Manual for the Mobius ActionCam（默比乌斯ActionCam说明书）.pdfVIP

Instruction Manual for the Mobius ActionCam Description The above picture shows the arrangement of the user operating features. The two heat sinks can become very hot during operation. This is normal, but all the same you should never leave the camera turned on where the surrounding temperature exceeds ~47°C (118°F) - for example in a car parked in the baking sun. If you wish to use the camera in very hot conditions you should ensure the heat sinks are adequately cooled, for example by directing cool air onto the metal plates or using a ventilator to dissipate the heat away from the metal plates. High temperatures will also damage the internal LiPo battery. If you use your camera in very hot conditions with external power, for example as a dashcam, you should consider replacing the battery with a Super Capacitor pair. These can be purchased from most suppliers who sell the Mobius. A Super Capacitor pair enables the camera to correctly save the last recording when external power is removed. A fully charged Supercap has enough energy to keep the RTC (Real Time Clock) running for several days (about 7-10) without external power connected. It only takes a few minutes to fully charge the Supercap. Likewise, a Supercap on its own only has enough power to record for a few seconds. As such, it is very important to always set the Power-Off Disconnect parameter to Immediate when using a Supercap. If the parameter is not set and power is removed while the camera is recording the last clip will be lost. The Power On - Auto Record parameter must be set to any value except to Off for the Power-Off Disconnect parameter to take effect. ►This manual does not cover replacing the internal battery or lens. If you need to do this, please refer to the very detailed instructions found at /forums/showpost.php?postcount=4. ►This manual assumes the camera is loaded with the latest firmware available at the time of writing. Functionality may var