Everlube Solid Film Lubricants Pexa Ltd（Everlube固体膜润滑剂Pexa有限公司）.pdfVIP

Everlube Solid Film Lubricants Pexa is the authorised European distributor for Everlube Products. A division of Curtiss Wright, Everlube Products manufactures Solid (Dry) Film lubricants. These are thin film surface coatings which form a protective layer with lubricant properties. They protect the substrate and offer permanent lubricant properties which reduce friction and resist wear. High performance resins are combined with Application is by spraying, dipping, brushing, spray/ lubricious pigments including PTFE, molybdenum tumbling or dip/tumbling. Most solid film coating disulphide and graphite, to provide a permanent lubricants achieve optimum wear properties when protective layer. Formulations are heat cured or air applied to a total thickness between 7 and 17 drying depending on application requirements and microns and when the lubricant is applied in very thin, available in solvent and water based compositions. multiple, uniform coats. Pexa has years of experience in supporting the Applications application of these products and can assist with Everlube products are applied on mating surfaces the implementation in any process. in a wide variety of environments. Applications include- Pipe joints, O Rings, rivets, bolts, valves, Brands actuators, aerospace components, engine Everlube Products’ range includes the following components, turbine blade roots, armaments, well known brands: strikers, springs and bearings. • Everlube® • Lube-Lok® • Lubri-Bond® • Ecoalube® • Ever-Slik® • Esnalube™ • Perma-Slik® • Kal-Gard® • Electrobon