事中质量控制（Quality control in process）.doc

事中质量控制（Quality control in process） Two. Quality control. 1, the handover process: transfer of work, confirm the completion of the process of the supervision, witness, deal with problem, for the next procedure construction preparation. There are two types of construction site: The different construction units in the handover process, supervision and supervision personnel among witness. (hardcover and structure construction team transfer) to reflect the specific:, walls, windows and doors, roof size checking, waterproof room water test transfer pipeline point transfer of geothermal pipe, water test, pressure test, electrical recording, confirmation procedure qualification, procedures for the transfer of the remaining issues, the floors and rooms, the relevant professional is not complete, quality defects requiring rectification, supervision personnel according to the agreed two acceptance. The qualified procedure, fine decoration according to the order of looking for, find the side is to ensure the fine decoration of precise size, the structure error elimination in the error range of hardcover allowed, the ash ash fill, tick the chisel. To avoid the deviation of the wall, the small end of the shed. Key: Waterproof room a water leakage; the window sash window installation center, main frame verticality; ground decoration size can meet the requirements (geothermal, cold water pipe across the distance away from the wall thickness) of supply and return water pipe radiator, toilet, bathtub, shower water, sewer pipe from a height from the wall the wall tube size, cabinets, cabinet fixed point selection. (two times of masonry wall shall not be used as a fixed point). The supervision personnel of the handover process to 100 witness acceptance. (Contractor) transfer, the structure of the construction unit to receive fine decoration. The general contractor of a hardcover activity, the supervision personnel of each item, batch inspection inspection table for signing two differen