Lifecella面膜介绍大全doc.docVIP

Lifecella面膜介绍 Lifecella公司简介 自日本的久光制药Lifecella果冻面膜，2000年已正式开始在台湾销售。 Lifecella发展史 2012年爆红是拜大S的美容大王之赐，2012年秋天与日本同步推出包装升级的改款版，新版的果冻面膜改采铝箔包装，精华成分可以完全被锁住，同时还搭配更优雅的绘画外包装，吸引人的程度无疑更加提升.其实果冻面膜是一般消费者对Lifecella面膜的俗称，所谓的果冻指是其精华成分，藉由日本久光制药独家研发出的ODT疗法(Occlusive封闭、Dressing服贴度与Therapy治疗性)，将精华成分完全凝固成犹如果冻状态，就像一片美容湿布，可以完全服贴在脸部，再经由暂时性的密闭隔离方式，精华液又可完全进入肌肤底层，所以业者敢自称效果更胜一般湿布型面膜。 Lifecella面膜活肤乳液Q10面膜5片装 Lifecella面膜Lifecella久光美容液嫩白保湿面膜 Lifecella面膜美容液眼膜锁水活肤眼膜 Lifecella面膜Lifecella美容液细致面膜 Lifecella面膜保湿美容液面膜白盒 Lifecella面膜水漾保湿眼膜 Lifecella面膜lifecella鮮橙洗面乳 Lifecella面膜lifecella天然泥清洁面膜 ·Lifecella面膜品牌故事及发展史 Lifecella面膜品牌故事 Lifecella面膜品牌故事及发展史2012年爆红是拜大S的美容大王之赐，2012年秋天与日本同步推出包装升级的改款版，新版的果冻面膜改采铝箔包装，精华成分可以完全被锁住，同时还搭配更. /cosmetics/lifecella/ Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supp