DELL推行的内容doc.docVIP

以下为DELL推行的内容，请参考。 Supplier Quality Engineering Sub-tier Supplier Management COR.30.WWP.SQ.0023Rev. 1.0 Released 04/03/02 Purpose Defines guidelines and minimum requirements of a Sub-tier Supplier Quality System. It is the intent of this process to have Dell SQE’s assist 1st tier suppliers in the implementation of sub-tier system to meet Dell Expectations. The 1st-tier supplier will then be responsible for managing it ongoing and report to Dell on performance to Quality. Scope Global Supplier Quality Engineering and suppliers they manage. 1. Definitions 1.1. 1st Tier Supplier will be called “Supplier” throughout this publication- A Supplier that sells products directly to Dell. 1.2. Sub-tier Supplier ? A Supplier that sells components and products to Dells 1st tier suppliers. 1.3. GQAM - Global Quality Account Manager (Responsibility WW 1st and Sub-tier supplier quality performance for Dell procured products) 1.4. JQE - 1st Tier Supplier Joint Quality Engineer (Works for 1st tier supplier, may be dedicated to Dell products) JQE is the interface between Dell SQE and GQAM on Dell products 1.5. Supplier SQE - 1st tier supplier Supplier Quality Engineer (Manages 2nd tier supplier quality for Dell components) 1.6. S-JQE 2nd tier supplier joint quality engineer (works for 2nd tier supplier, some time dedicated to Dell components), reports performance/issues to 1st Tier supplier SQE 2. References 2.1. Dell Global Supplier Quality Engineering Quality System 2.2. Commodity specific tool kits 2.3. Dell SQE Sub-tier Supplier Scorecard COR.40.WWP.SQ. 0158 3. Appendix 3.1. A ? Role and Responsibilities guidelines 4. General 4.1. The intent of this process to drive fundamental Quality principles into the sub-tier supply base. It is completely acceptable to implement the tools as we have at Dell, but it is also acceptable for the supplier to implement their process and tools as long as their quality meets Dells expectations. 5. Responsibility and Authority 5.1.