cad图形的转化（Transformation of CAD graphics）.docVIP

cad图形的转化（Transformation of CAD graphics） CAD. Building drawing better how into PKPM structure model of 2009-03-03 10:51:42| classification: Architectural Design: | | label font and subscription. I put the specific application of simple methods are summarized as follows For complex building plans can be directly to the building plans for conversion to PKPM modeling The correct method is: Double click the PMCAD interface in the C AUTOCAD plan to the construction of model transformation : the main menu in the open , and then select the DWG map CAD map to convert, open the menu on the right after you were selected columns and the modeling and grid were selected in the figure after to display select check and select after conversion to building model data can return the modeling. May I say is not clear enough, probably is the process, you open the conversion C AUTOCAD plan to building model can explore their own conversion method. In the conversion of modeling is strongly recommended that you only convert the pillars and wall and beam axis, to return to modeling in addition, otherwise it is easy to appear deviation. If you are using it to do the building, clear layer separation can be done: 1: opening day of buildings or structures, to draw a OPEN axis network construction plan (or axis automatic homing a layer, if the use of CAD, need to build a new layer) 2: according to the need to draw the pillars and beams and other components of the position (note the component layers and TchDwg layers for each component in the corresponding, if too much trouble, as long as the axis and column well) 3: enter the command appload, load TchDwg.arx 4: selected in the pop-up dialog box to operate it, and other parameters. 5: the standard model has been built up PKPM operation layer, not satisfied with the place and then further modify and add standard layer and set the parameters of PKPM Another note: the conversion from CAD inside over the model have a defect: the first time in the pre