pet防水施工（Waterproof construction of pet）.docVIP

pet防水施工（Waterproof construction of pet） Construction scheme of PET self wetting waterproof roll sheet with wet laid method Adhere to PET wet shop method, single sided self-adhesive waterproof coiled material Paste must PET wet laid special polyester composite waterproofing materials (hereinafter referred to as PET waterproofing membrane is composed of poly (aluminum) film, plastic composite), adhesive material and insulation material, its unique material characteristics and construction method of wet laying process has the following salient features: 1. super adhesive properties (wet sticky), and the degree of adhesion to the grassroots beyond imagination. 2., save resources, reduce resource consumption, and waterproof effect is wonderful, high standard waterproof adopts laminated construction, more waterproof effect. 3., safety and environmental protection, the use of cement based materials wet shop, without the need for primer, hot-melt, no volatile solvents, no fire hazards, no personal injury. 4. to adapt to the harsh construction environment, wet, uneven surface can take time for. 5., strong resistance to damage, if broken, repair is very simple. 6. cement based adhesive material covering curing, with rigid waterproof function, waterproof layer that will have two lines of defense. 7., no channeling water of the risk, according to leakage point easily found waterproof damage point, easy overhaul, maintenance cost is low, the real one hundred percent self shrinkage performance. 8., construction application fool, simple and convenient operation. 9., the new production line can produce 2 meters wide coil, reducing lap, faster construction, better effect, especially suitable for large construction. Adhere to PET wet shop method, single sided self-adhesive waterproof coiled material I. construction process Clean the face, wet grass (such as grass without the wetting process), positioning, play the line, and paved with cement slurry mixing, large surface paving PET me