SDTJXZRQ029进口压力容器产品安全性能监督检验实施细则.doc

进口压力容器产品安全性能监督检验实施细则 一、 总则 Chapter 1 General Provisions 1、为保证进口压力容器产品制造质量监督检验质量，制订本细则。 1 This outline is formulated in order to ensure effective supervisory inspection of the pressure vessel products imported 2、与进口压力容器产品制造质量监督检验有关各方及人员，均应遵守本细则。 2 This outline is applicable to whom relevant to the supervisory inspection for safety performance of the pressure vessel products imported 二、依据 Chapter 2 Supervisory Inspection Basis 1、中华人民共和国国务院令第373号《特种设备安全监察条例》； 1 Special Equipment Safety Supervision Regulation（Promulgated by Decree No. 373 of the State Council of the Peoples Republic of China） 2、中华人民共和国国家质量监督检验检疫总局令第22号《锅炉压力容器制造监督管理办法for Manufacture Licensing of Boiler and Pressure Vessel.（Promulgated by Decree No. 22 of General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China） 3、《压力容器安全技术监察规程》； 3 Supervision Regulation on the Safety Technology for Pressure Vessel. （Promulgated by Safety Supervision Department of General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China） 4、《锅炉压力容器产品安全性能监督检验规则ory Inspection Rule for Safety Performance of Boiler and Pressure Vessel Products. （Promulgated by Safety Supervision Department of General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China） 三、监督检验内容 Chapter 3 Contents of Supervisory Inspection 1、对压力容器制造过程中涉及安全性能的项目进行监ory inspecting the items related to the safety performance of the product during pressure vessel manufacturing. 2、对受检企业压力容器制造质量体系运转情况监督检查。ory examining the implementation of the quality system of the supervised manufacturer. 四、监检项目和方法ory Inspection 1、图样资料（1）检查压力容器设计单位的设计资格印章，确认资格有效。Examine the certificate of pressure vessel designer, confirm the effectiveness of its qualification. （2）审查压力容器制造和检验标准的有效性。Review the effectiveness of standards on manufacture and inspection for pressure vessel. （3）审查设计变更（含材料代用）手续。Review the approval formalities for design change (including ma