怎样缩短开机时间（How to shorten the boot time）.docVIP

怎样缩短开机时间（How to shorten the boot time） Press Del to enter the CMOS settings, the floppy drive (Drive A) is set to none, the hard disk is connected to the first IDE (or SATA1) interface, the first boot sequence is set to HDD hard disk. Otherwise - open the system properties (on my computer right - properties, or in the control panel to open the system, the shortcut win+pause break) the Advanced tab, in the startup and recovery , open the Settings , two Chinese removed the boot zone, if many users of the system to retain the display list of operating system time , the time for 0 seconds, then start automatically. This - the next step is the key in the system properties to open hardware tab, open the device manager, IDE ATA/ ATAPI controller , double-click to open the secondary IDE channel property, advanced settings tab, the 1 and 2 modes of transmission equipment to DMA if available if you can choose, equipment type no is selected as the no, point to determine the complete set, the main IDE channel set the same method. Speed up scrolling: Click Start - run, enter regedit, enter, open the registry editor, and expand HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager\MemoryManagement\PrefetchParameters Find EnablePrefetcher, double click the value to 1, close the registry editor, restart, you can see the effect. In addition: You can click Run on the start menu, and then enter msconfig, and remove the hook before the start of the startup tab under the start tab. As long as the remaining Ctfmon (input method) and antivirus program can be, and the other can be removed. After this optimization, your boot speed will be greatly accelerated. ---------------------------------------------------------------------------------------------- EnablePrefetcher: is the file system prefetching settings, the default is 3 representative system and application Windows file system prefetching. All prefetched files are stored in the c:\windows\prefetch folder, PF extension, c