win7蓝屏代码（Win7 blue screen code）.docVIP

win7蓝屏代码（Win7 blue screen code） 1.0x0000000A:IRQL_NOT_LESS_OR_EQUAL Error analysis: Mainly caused by problem drivers, defective or incompatible hardware and software. From a technical point of view. Indicates that in the kernel mode, there is a level process request (IRQL) accessing the memory address where it has no permission to access it. Solution： Reinstall the hardware driver and check if there is a conflict between hardware, uninstall unstable or wrong software. 2.0TRAP_CAUSE_UNKNOWN Error analysis: If this error information is encountered, then unfortunately, the result of the KeBudCheck analysis is wrong and the reason is unknown. Solution： Think back to when this error occurred, what you did to the system when it first happened, and what was happening when it happened. Identify the possible causes from this information and select the appropriate solution to try to rule out. 3.0x0000001A:MEMORY_MANAGEMENT Error analysis: This memory management error is often caused by hardware, such as new installed hardware, memory itself, and so on. Solution： If it is in the installation of Windows appears, it may be due to the computer can not reach the minimum memory and disk requirements to install Windows, Windows 7 minimum configuration requirements are: 1Ghz processor, 1G memory, 16G hard disk. 4.0x0000001E:KMODE_EXCEPTION_NOT_HANDLED Error analysis: The Windows kernel checks an illegal or unknown process instruction. This stop code is usually caused by the memory of the problem, or something similar to the previous 0x0000000A. Solution： There is a problem with hardware compatibility: check the compatibility of the software for problems. The problem of device driver, system service interruption or memory conflict and conflict: if in the blue screen information appears in the name of the driver, please try to install the recovery mode or disable or delete the driver console, and disable any newly installed driver and software. If the error occurs during syst