造价员参考资料 计算工程量秘籍之一（Cost Clerk reference data, calculate one of Engineering Volume cheats）.docVIP

造价员参考资料 计算工程量秘籍之一（Cost Clerk reference data, calculate one of Engineering Volume cheats） Cost reference calculation of engineering quantity cheats.Txt19 Ming can be understood as the two moon sits in the sky, mutual care, mutual light, are indispensable, the Everfount light is connected to each other and bridge the link! This long journey filled with many bleak lonely, no friends who are living in the dark, and no friends who are the orphans. Leveling site: excavation, filling, transportation and leveling of buildings with a thickness of less than 30cm 1. Calculation rules of leveling site (1) list rules: according to the design drawing size, the first floor area of the building is calculated. (2) quota rules: according to the design drawing size, the first floor area of the building is calculated. 2. Calculation method of leveling site (1) the leveling area of the list rule: the flat area of the list rule = the floor area of the first floor (2) the leveling area of the quota rules: the level of the quota rules, the floor area = the floor area of the first floor 3, matters needing attention (1) in some areas, quota rules leveling area: the exterior line put 2 meter. Calculation, according to the outer wall outside the line of 2 meters of graphics block calculation, and then with the bottom floor area combined calculation; or according to put 2 meters outside the center line * 2= outside 2 meters area, and the bottom floor area combined calculation. In this case, the following difficulties arise in the calculation: It is troublesome to divide blocks, the arc part is not easy to handle, and the error is easy to occur. 2. The central line of 2 meters is more troublesome and difficult to calculate. After 2 meters outside, there may be overlapping parts. How many bad calculations should be deducted?. (2) in the list environment, the price of the leveling site may be calculated according to the actual situation of the bidder when the bidder quoted the price, and the lengt