SV-71INSTRUCTIONMANUAL使用说明书Ver–1A.PDF

SV-71 INSTRUCTION MANUAL 使用說明書使用說明書 Ver – 1A 使用說明書使用說明書 For safe operation 重要安全事項 1. Prior the use of this product, please read the instruction Manual. Keep this Instruction Manual and the user may read it at anytime when necessary. 使用本產品前請先閱讀本說明書 ，同時應將此說明書妥善保管以便能隨時查閱 。 2. Before turn on the power, be sure to check the power voltage and phase agreeing with the nameplate that indicated in the control box. 電源開啟前請先確認電源的電壓與相數 ，是否與控制箱銘牌相符。 3. Grounding the machine is always necessary for safe and normal operation. 為了正常安全運轉須安裝地線 。 4. Check lubricating oil prior to operation. 操作前請先確認縫紉機潤滑油充足 。 5. Check that rotational direction of the motor is correct prior to operation. 操作前請先確認馬達轉動方向正確 。 6. So as to prevent personal injuries during operation, be careful not to allow your head and hands to come close to the moving parts. Also never try to stop it with external forces. 使用中切勿將頭 、手靠近皮帶輪、皮帶、旋梭和天平等移動部份 ；同時也不可以用外力強制停止移 動部份 。 7. For the following conditions, turn off the power or disconnect the power plug from receptacle. 發生下列情況時應立即關閉電源開關或者拔下電源插頭 ： 7.1 For threading needle or replacing bobbin. 穿線和更換旋梭時 。 7.2 To plug or unplug any connectors from control box. 插拔控制箱上任何連接線與接頭 。 7.3 For maintenance and repairing. 保養與修理時 。 7.4 When machine is not at use, inspected or adjusted. 翻抬針車頭 、取下皮帶時和機器休息不用時 。. 7.5 When lightning and thunder occurs. 打雷閃電時 。 8. Repairing, remodeling and adjusting works must only be done by appropriately trained technicians or specially skilled personnel. 本產品的修理 、改造和調整應由受過專門訓練的技術人員來進行 。 1 I. Connector Diagram 接頭定義圖接頭定義圖 接頭定義圖接頭定義圖