2012 Chrysler 200 Sedan CANADIAN （2012年加拿大克莱斯勒200轿车）.pdfVIP

2012 Chrysler 200 Sedan CANADIAN SPECIFICATIONS The information shown is preliminary and based on data available at the time of publication. All dimensions are in millimetres (inches) unless otherwise noted. All dimensions are measured at curb weight with standard wheels and tires unless otherwise noted. NOTE: Information shown is correct at time of publication and is subject to change. GENERAL INFORMATION Body Style Four-door sedan Assembly Plant Sterling Heights Assembly, Michigan, USA EnerGuide Vehicle Class Mid-size sedan Introduction Date December 2010 ENGINE: 2.4-LITRE, GASOLINE, DOHC, 16-VALVE, VVT, SMPI I-4 Availability Standard on LX and Touring Type and Description Four-cylinder inline, tuned intake manifold with electronic active charge motion control valves with dual counter-rotating balance shafts Displacement, cu. cm (cu. in.) 2,360 (144) Bore x Stroke 88 x 97 (3.46 x 3.82) Valve System Chain-driven DOHC, 16 valves, electronically controlled dual variable-valve timing (VVT), direct-acting shimless mechanical bucket tappets Fuel Injection Sequential, multi-port, electronic, returnless Construction High-pressure die-cast aluminum block with dry iron liners, cast-aluminum cylinder heads, cast-aluminum ladder frame, forged-steel crankshaft Compression 10.5:1 Power 173 bhp @ 6,000 rpm Torque 166 lb-ft @ 4,400 rpm Max. Engi