hgm6320发电机组控制器 - maquirent.docVIP

Generator units Transfer Switch Control HGM6300 AUTO CONTROL MODULE SOFTWARE MANUAL SMARTGEN ELECTRIC CONTENT 1. DESCRIPTION 1 2. INSTALLATION INSTRUCTIONS 1 3. config manager mnu 3 4. EDIT CONFIG MENU 5 4.1 EDIT MODULE 5 4.2 EDIT MISCELLANEOUS ITEMS 5 4.3 EDIT CONFIGURABLE INPUTS 9 4.3.1 EDIT ANALOGUE INPUTS TAB 9 4.3.2 EDIT DIGITAL INPUTS TAB 14 4.4 EDIT RELAY OUTPUTS 18 4.5 EDIT FRONT PANEL INDICATORS 24 4.6 EDIT SYSTEM TIMERS 26 4.7 EDIT MAINS LEVELS 29 4.8 EDIT GENERATOR LEVELS 31 4.10 EDIT SCHEDULER 43 5. REMOTE INSTRUMENTATION 44 5.1 MIMIC TAB 46 5.2 ALARM STATUS TAB 47 5.3 STATUS DISPLAY TAB 47 5.4 ENGINE INSTRUMENTATION TAB 48 5.5 GENERATOR/MAINS INSTRUMENTATION TAB 48 5.6 EVENT LOG TAB 49 6. SETUP MENU OPTIONS 50 6.1 Communications and Security 50 6.2 MODULE Password 53 7. RE-CALIBRATION MENU 54 7.1 RE-CALIBRATE CONTROLLER 54 8. COMMUNICATIONS OPTION CONNECTIONS 58 DESCRIPTION The configuration software allows the HGM6300 automatic control modules to be connected to a PC. Once connected the various operating parameters within the module can be viewed or edited as required by the engineer. This software allows easy controlled access to these values and also has diagnostic monitoring facilities. The Configuration interface should only be used by competent, qualified personnel, as changes to the operation of the module may have safety implications on the panel / generating set to which it is fitted. The information contained in this manual should be read in conjunction with the information contained in the appropriate module documentation. This manual only details which settings are available and how they may be used. The operation of the module is detailed in its own relevant manual. This manual is designed to assist users of the 5xxx series configuration software, this is the common configuration software for all modules of the 6310/6320 range. All software operations such as file handling (loading and saving to disk, reading from