Nonslip floor and deck coating Technical （防滑地板和甲板涂料技术）.pdf

ANTI-SLIP COATINGS AS -250 Technical Bulletin # 2005 Non-slip floor and deck coating Product Description AS-250 is a general purpose, vehicular grade, non-slip deck coating designed for application in slippery areas to make them safer for operations of foot and rolling equipment traffic. AS-250 was originally developed for application on flight decks of aircraft carriers to provide the greatest possible resistance to wear and tenaciously adhere to decks so as not to fracture or disintegrate under the impact of high speed aircraft landings. Fire retardant in the cured state, AS-250 resists fire, most acids, alkaline, solvents, grease, oil, salt water, detergents, alcohol, gasoline, jet fuels, and other hydraulic fluids. Refer to American Safety Technologies Chemical Resistance Table for detailed performance data. Surface Preparation CONCRETE Remove oil, grease, dirt, wax, etc., by dissolving with a commercial grade cleaner/degreaser then flush the area thoroughly with clean water and allow it to dry. Remove all paint films, laitance, and loose concrete by scarification or shot blasting. Patch any holes or significant defects with AS-5000 Epoxy Patching compound. Smooth or glazed surfaces should be roughened and new concrete should cure at least 30 days with good ventilation prior to application. Form release agents, hardeners, sealer, etc… will interfere with adhesion and mus