马桶的选择（Toilet choice）.docVIP

马桶的选择（Toilet choice） First of all, talk about the main technical indicators of the toilet. I think the following are the main aspects: 1 、 flushing mode. Generally have straight, siphon, and spray siphon type. Straight into the type of Hula is directly down, sound sound, the power of large, not easy to plug the pipeline. For the TX of the old house, because the black pipe is easy to stick dirty, it has become narrower and easier to plug, so it can be considered. But in general this should be relatively old, and the price should be low. Siphon type is the water out, turn ah, turn ah, go down, through the siphon principle, sound light, relatively gentle, but the effect is not expected to go straight so forthright. For the new house, the pipes are better and siphon type is optional. As for the siphon spray type, it combines the advantages of siphon and direct injection. The siphon principle is used, while the siphon type is more flexible than the pure siphon. Therefore, the sound is light and the flushing effect is better. Now the mainstream should be this kind of bar. 2, glaze level. Is the largest of all weapons glazed ware contests. Good glaze, high density, bright, smooth, in short, looks comfortable. However, in the new sanitary ware point of view, non professional people probably can not see a so. Unless it is very high-grade and poor grades put one, it is more obvious. So, lets go the other way, just look at the place where the glaze is painted. A good brand will be glazed in the water and inside the tank, especially in the water. If it is applied, it will be smoother and less likely to clog up. The so-called details determine success or failure, the general brand, some are not in these two places glaze. From this point of view can basically see a toilet grades. So, when you buy, you can put your hand inside the toilet to touch it and see if its smooth or not. 3, water tank parts. As for the water tank parts, naturally its good. The brand will make good use of t