11华东油气储运专业课大纲（11 East China oil and gas storage and transportation professional courses outline）.docVIP

11华东油气储运专业课大纲（11 East China oil and gas storage and transportation professional courses outline） Masters entrance examination outline for 2011 Examination subjects Name: professional foundation synthesis (including engineering fluid mechanics, heat transfer engineering, engineering thermodynamics) Examination subjects Code: [832] Examination requirements: 1, require candidates to master engineering fluid mechanics, heat transfer and engineering thermodynamics of the basic concepts, basic principles and basic methods of calculation and analysis, with the use of basic theory to solve practical problems. 2, the examination should be accompanied by the necessary writing tools. Two, examination content: 1 、 Engineering Fluid Mechanics 1) fluids and their main physical properties (a) correctly understand and master the concepts of fluid and continuum; B) the main physical properties of fluid density, severe and relative density relationship; fluid compression and expansion influence reason and temperature on fluid viscosity and viscous fluid; Newton inner friction law; correct understanding of ideal fluid and the actual fluid concept etc.; (c) the force acting on a fluid. 2) fluid statics A) master the concept of hydrostatic pressure and two basic characteristics; (b) master the method of derivation of fluid balance differential equation by means of infinitesimal analysis; C) three pressure representations (absolute pressure, table pressure, and vacuum) and unit conversions; (d) grasp the analytical method of isobaric surface and pressure distribution in absolute and relative stationary fluid; E) master the basic equations and applications of statics; (f) measurement and calculation of pressure and pressure difference; G) concepts and characteristics of isobaric surfaces; H) on the surface of the liquid pressure calculation method of master p0=pa and P0 = PA two under the condition of static fluid pressure in the plane and the total effect on the curved surface (size, dir