XY630系列板框压滤机技术参数英文版.pdfVIP

XY8-32 Square 630 Hydraulic self-protection packing series (Hydraulically controlled、automatically pressure holded) Structure and working principle The following diagram is the Structure of filter press. In the diagram, 2 represent the fixed head plate which is fixed on thrust plate 1, 5 represent the mobile tail plate which is fixed on the movable compression plate 6. Between these two end-plate there are filter plates 3 and filter cloth 4 arranged in order. All filter plates are placed on the beams 7 by their two handles which are installed on the both sides respectively. All of the filter plates can be moved horizontally along the beam. The front- end of piston rod is hinged with the movable compression plate 6. In the hydraulic thrust, the piston pushes the movable heavy end piece. Thus all of the filter plates and filter cloth are pressed in the rack. When the hydraulic pressure reached the pressure that the machine need, you can revolve the swith to automatic packing position “ Ⅰ”. Thus you can feed the slurry to filter. Electrical contacts are automatically regulated in the upper and lower limits. After end filtration, revolve the switch to 0 position. Compression plate is moved back in place . Structure and foundation drawing 1、thrust plate 7 、plate shifting device 2、head plate 8、beam 3、filter plate 9 、hydraulic cylinder support 4、filter cloth 10 、hydraulic cylinder 5、the mobile tail plate 11、hydraulic station 6、compacting plate 12、electrical cabinet performance parameter performance The work pressure in filter chamber ≤1.0MPa The work pressure of hydraulic pressure ≤16MPa Rated pressing force 345KN