十大路由设置（Ten routing settings）.docVIP

十大路由设置（Ten routing settings） More and more people use the wireless router installation, generally does not have what problem, and now is Chinese interface, very easy to use, it is used in the process, will encounter many be rather baffling problems, I do not know how to start to solve the solution, we have collected some trouble now, we hope to help. How to set up the wireless network section of the wireless router (take DI-524M as an example) When your computer has been connected to the router, the wireless network settings for DI-524M are as follows: After you connect to DI-524M, open the IE browser, type 192.168.0.1 in the address bar, and click enter. Enter the router user name and password to enter the router configuration interface. Click the wireless settings on the left. By default DI-524M wireless function is activated (i.e. you open the router, you can find the computer through wireless network card equipment); the default wireless network name (SSID) to dlink (the name of the device to search for channel 6); default; default no safe way. Activating wireless enables the wireless function of the router to be switched on or off. The name of the wireless network is the name of the wireless network that the computer can find, and some routers are also called SSID Wireless channels can be manually selected, or using the routers auto scan channel function. Automatic scanning channel function is recommended to avoid frequency interference from other wireless networks. Encryption of wireless networks is an important way to ensure wireless security. The following security options are available: WEP, WPA-Personal, WPA2, WPA2-Auto. For the average user, you can choose WEP, WPA-Personal, one of these two ways. The following general configuration options for the general user selectable encryption. 1.WEP mode encryption After selecting the WEP security method, the following interface appears. There are two options for WEP encryption, one for 64Bit and one for 128Bit. Th