万科标准（Vankes standard）.docVIP

万科标准（Vankes standard） The second part is architecture 1. The design description 1. The architectural design always shows the table of each subitem material and the table of decoration practice, and the subitem description is prepared according to the specific situation. 2, building design general notes about the construction area of calculation to be accurate, and with the design of deepening accounting continuously until the final results, construction area of calculation should be in strict accordance with the issued by the ministry of land and resources bureau of shenzhen architectural design of technical and economic index calculation rules of shenzhen. 3. All doors and Windows should be prepared with a unified schedule of doors and Windows and a simplified drawing of the drawing, numbering and selection, and the number of doors and Windows should be counted in the table of doors and Windows. Door codes for fire doors and doors are easy to identify. Unified practice 1. The unified construction of CB001 multi-layer project waterproof and uniform construction practices 2, residential design and unified technical requirements: (1) Windows and doors a. enter A door width is not less than 1000, bedroom door width is not less than 900, the kitchen door width is not less than 800, toilet door width is not less than 750, the servant door hole width is not less than 800. B. Door opening height: the entrance door of the door of the door height is 2,800, 2200, 2,200, 30002,200 C. The door stack size is not less than 100, and the size of the door stack is not less than 50, and the construction column is strengthened. D. When the entrance door is close to the door, it should consider the opening conflict after the occupant security door. E. the same type of room window size should be unified as far as possible. The width of room window width is greater than or equal to 3,300. The window width of the main bedroom window is not less than 1800, and the number of time is not les