Al-Mg-Si-Mn-Fe系合金均匀化过程中的显微组织演化-数值模拟与实验结果对比.pdfVIP

Trans. Nonferrous Met. Soc. China 27(2017) 747−753 Microstructure evolution during homogenization of Al−Mg−Si−Mn−Fe alloys: Modelling and experimental results 1 2 3 1 4 C. L. LIU , H. AZIZI-ALIZAMINI , N. C. PARSON , W. J. POOLE , Q. DU 1. Department of Materials Engineering, The University of British Columbia, Vancouver V6T 1Z4, Canada; 2. Department of Materials Science and Engineering, McMaster University, Hamilton L8S 4L7, Canada; 3. Rio Tinto, Arvida Research and Development Centre, P. O. Box 1250, Jonquière (QC) G7S 4K8, Canada; 4. SINTEF Materials and Chemistry, P. O. Box 4760 Sluppen, 7456 Trondheim, Norway Received 3 May 2016; accepted 8 December 2016 Abstract: Microstructure evolution during the homogenization heat treatment of an Al−Mg−Si−Fe−Mn (AA6xxx) alloy was investigated using a combination of modelling and experimental studies. The model is based on the CALPHAD-coupled homogenization heat treatment model originally developed for AA3xxx alloys (i.e., Al−Mn−Fe−Si). In this work, the model was adapted to the more complex AA6xxx system (Al−Mg−Si−Mn−Fe) to predict the evolution of critical microstructural features such as the spatial distribution of solute, the type and fraction of constituent particles and dispersoid number density and size distribution. Experiments were also conducted using three direct chill (DC) cast AA6xxx alloys with different Mn levels subjected to various homogenization treatments. The resulting microstructures were characterized using a range of techniques including scanning electron