镀膜和打蜡、封釉的差别(国外英文资料).docVIP

镀膜和打蜡、封釉的区别(国外英文资料) The main component of car wax is polyethylene latex or silicone polymer compound, and contains oil components, can provide high brightness of the paint, but the water is easy to decompose, short service life, no hardness, not resistant to friction, so every year to nearly 20 times the wax. Waxing and grinding will cause the paintwork to be worn without luster, but the glaze will be different. It is insoluble in water, characteristics of fire resistance, not afraid of acid, so the body paint can seal after high temperature resistance, wash resistance, friction resistance, not easy to stick dust, not afraid of acid rain, anti-oxidation, anti ultraviolet, long-term protection of paint. Coating and waxing, sealing glaze are essentially different, its work is characterized as protective film, waxing or glazing, rely on high speed turn pressure into the paint, but by smearing mild, attached onto the surface by chemical reaction. Before applying the film, it is necessary to grind and polish the finish, then apply a layer of adhesive, and finally apply film. Finally, the surface of the paintwork forms a protective layer with compact structure and strong oxidation resistance. Since pressure is not applied to the paint surface by pressure, the paint can avoid pressure damage and is more conducive to the protection of paint. Coated car paint can maintain about a years luster, usually as long as the wash is very seductive. The car car waxing and glazing, two with automotive beauty, car paint gloss protection beauty means, so the function, have the same place in two, but a comparison of the use of bright glaze glaze car has obvious advantages. A bright glaze, insoluble in water, can avoid the defects of water scared car waxing. Because the wax used in waxing the car is soluble in water, so if the car has just finished playing wax, rainy weather, wax will be dissolved by the rain, it can not protect the paint and the role of beauty. At the same time as the wa