竣工图类型内容与要求(国外英文资料).docVIP

竣工图类型内容与要求(国外英文资料) Completion drawing type, content and requirement The completion of the completion of construction projects is an important part of archives, is the engineering construction after the completion of the main document materials, is a building of true portrayal, is a necessary condition for the completion of the project acceptance, engineering maintenance, management, renovation and expansion of the basis. New construction, reconstruction and expansion projects must be completed as planned. 1. Compilation requirements 1.1 where construction has not been changed according to the construction drawings, the completed drawings shall be stamped and signed in the blank space at the sign of the construction Tutu. 1.2 where the general drawing changes, the units may, in accordance with the design change basis, draw them directly on the construction drawing and affix and sign the completed stamp. 1.3, if the structure, form, process, layout, project and other major changes and changes in the surface of more than 40%, should be re built drawings. Re drawing of the drawings must have the name and figure number, figure number according to the original number. 1.4 the preparation of completed drawings must be prepared drawings of various professional drawings of the directory, the drawing completed drawings must be accurate, clear, complete, standardized, modifications must be in place to reflect the actual completion of the project acceptance. 1.5 for the redrawing of completion drawings must be drawn blueprint or plotter white figure may not use the copy of the drawings. 1.6 the drawing up units shall draw up the completed drawings in accordance with the requirements of the national construction drawing specifications, using drawing pens or signing pens and non fading drawing ink. 2, the main content 2.1 the completed drawings shall be arranged according to the units, and shall be classified and arranged according to the specialty and system. 2.2 completion draw