玻璃幕墙施工工艺及技术方案(国外英文资料).docVIP

玻璃幕墙施工工艺及技术方案(国外英文资料) Construction technology and technical scheme of glass curtain wall 1 、 installation process and technical scheme of connector Curtain wall component site construction methods and technical measures are as follows: annex two, glass and aluminum curtain wall installation work instruction 1.1 process description: Process: familiar with the drawings and technical disclosure. Familiar with the construction site: find the embedded iron parts, align the vertical beam line, pull the horizontal line, control the horizontal height and the deep position. 1.2 basic operation instructions: 1.2.1 familiar with drawings: understand changes, changes and design changes in previous processes. 1.2.2 familiar with the construction site: the construction site of the familiar, including two aspects, first, the quality of the construction process acceptance; two is the control drawing requirements for the next work arrangements. 1.2.3 to find the embedded iron parts: the role of embedded iron pieces is to fix the connecting parts so as to connect the curtain wall structure with the main concrete structure. The connecting piece is arranged at first to find the original embedded parts, only seek to associate the embedded parts very accurately install connectors. 1.2.4 control vertical beam vertical: the center line of the vertical beam is also the central line of the connecting piece, so it is necessary to pay attention to the position of the connecting piece during installation, and the deviation is less than 2mm. 1.2.5 pull horizontal control level and depth dimension. Although the control level to the buried iron piece, but due to the influence of construction error, installation and connection pieces still need to control the level and depth of the line of pull connector installation to ensure accurate methods according to previous process operating requirements. 1.2.6 spot welding: after the connecting parts are located in the three-dimensional space, the temporar