深圳彩天利标牌标识的技术要求(国外英文资料).docVIP

深圳彩天利标牌标识的技术要求(国外英文资料) Shenzhen color Tianli signs technical requirements Technical requirements for signs and labels Overall technical requirements The relationship between the diameter of the fastening hole on the label and the diameter of the fastener when the label is assembled with the product. The glue pasted label does not need to make a fastening hole. Signs can be fastened to the product by rivets, screws or other possible means. Dimensional tolerances and geometric tolerances of signs There should be no distortion of the sign and obvious dent and bulge, and the flatness tolerance should be consistent in the whole plane. With special requirements, the supply and demand sides agreed. The contents, text, and symbols on a sign The contents and arrangement of the signs and the colors should be defined according to the relevant regulations. The website of / is not defined by the designer of the label in accordance with the relevant principles. The Chinese characters on the signs should be simplified and simplified by the state, and characters are allowed to be used when special needs are given. Chinese characters are recommended in bold, long, imitation, and imitation. The name of the product and the name of the manufacturer allow clear, beautiful and easily recognizable other fonts. Chinese characters, Latin letters, Greek letters, Rome numerals and Arabia numerals should be written in accordance with the regulations. The sign placed trademark logo and product quality mark, it should conform to relevant regulations. The name, unit and unit symbol used in the label shall be in conformity with the provisions. Material Science The materials used for the signage are selected according to the requirements of the host products and the working conditions. Industrial pure aluminum, stainless steel, cast steel, rolled sheet steel, etc.; Thermosetting and thermoplastic; Brass and other materials are available for special use. Sticking labels shall be made of bonding mat