叉车用制动液应用须知(国外英文资料).docVIP

叉车用制动液使用须知(国外英文资料) Instructions for use of brake fluid for fork lift trucks 2011-09-15 12:44 castor oil alcohol type brake fluid is no longer needed. Mineral oil brake fluid has been gradually stopped by synthetic brake fluid, and synthetic brake fluid is widely used. With ether, alcohol, ester and other additives into the lubrication, anti-oxidation, rust, rubber swelling and other additives, the work temperature range is wide, low temperature flow easily, flexible braking, high boiling point, high temperature Castor oil alcohol type brake fluid is no longer needed. Mineral oil brake fluid has been gradually stopped by synthetic brake fluid, and synthetic brake fluid is widely used. With alcohol, ether, ester mixed lubrication, anti-oxidation, anti rust, anti swelling rubber additives, wide temperature range, low temperature fluidity, flexible braking, high boiling point, high temperature and evaporation loss, not easy to produce gas resistance, the metal and rubber parts corrosion, so it is widely application. Requirements of forklift on performance of brake fluid (1) good low temperature performance, if the brake fluid at low temperature, poor mobility, easy to solidify, will make the pipeline, pump and other blocked, brake will feel the brake pedal is very hard, can not move and can not brake. It is usually required that the brake fluid should not solidify at -40 DEG C and flow freely. (2) appropriate viscosity, viscosity is too large, low temperature mobility, brake performance decline; viscosity is too small, high temperature environment can not provide reliable lubrication, and easy to leak. In order to ensure that the brake cylinder and rubber skin bowl can slide well, the brake fluid is required to have proper viscosity. (3) the boiling point to frequent forward and reverse forklift each cycle in a long time, the brake in the braking state, increasing the temperature of the brake system, the brake fluid such as the use of low boiling point, easy evaporatio