08建筑设计标准规范(国外英文资料).docVIP

08建筑设计标准规范(国外英文资料) General requirements for construction drawing design 4. construction drawing design 4.1 General requirements 4.1.1 construction drawing design documents (1) all the professional design drawings (including drawings, catalogues, instructions and necessary equipment and materials tables, see section 4.2-4.8) as well as the total cover of the drawings involved in the contract requirements. (2) the engineering budget required by the contract. Note: if the project does not require the preparation of the project budget after the design of the project, the construction plan design document shall include the project budget estimate. 4, 1.2, the total cover should indicate the following content: (1) name of the project (2) name of organization; (3) design number of the project; (4) design stage (5) the name of the legal representative of the organization, the chief technical officer and the head of the project and the seal of his signature or authorization; (6) compiling the date (that is, the year, the month) 4.2 total plane 4.2.1 in the construction design stage, the total plane design documents shall include drawings, catalog design specifications, design drawings and calculations. 4.2.2 drawings catalogue The new drawing should be listed first, and the standard drawing and reused drawing should be selected later. 4.2.3 design notes General works are written on the relevant drawings. Such as the reuse of construction drawing and description of a project, should specify the preparation unit, the project name, number and date of design; lists the main technical and economic indicators (table 2-1 table, this table can also be listed in the general plan). 4.2.4 general plan (1) retaining the topography and features; (2) measuring coordinate network and coordinate value; (3) the measuring coordinates (or positioning dimensions) of the four areas of the site, the location of the red line of the road and the lines of the building or the boundaries of the land;