09建筑设计标准规范(国外英文资料).docVIP

09建筑设计标准规范(国外英文资料) Design drawing 4.3.4 design drawings (1) plane plan A. bearing wall, column and its positioning axis and axis number, location of internal and external doors and windows, numbers and location dimensions, door opening direction, indicating room name or number; The total size of the B. axis (or outsourcing total size) size, axis (spacing, span), door and window size, segment size; C. wall thickness (including load-bearing walls and non load walls), column and wall columns, wide and deep dimensions (when necessary), and their relation to axis dimensions; D. deformation joint location, size and practice index; E indexes of location and related practices of major construction equipment and stationary furniture, such as sanitary ware, rainwater pipes, sinks, tables, cabinets, cabinets, partitions, etc.; F. lifts, escalators and trails (indicating specifications), stair (ladder) position and stairs, down and down directions and numbered indexes; G, location, size and structure of the main building structure and practice of index components, such as atrium, skylight, trench, pit, important equipment or equipment base position size, various platforms, sandwich, manhole, balcony, awning, stairs, ramps, apron, ditch etc.; H. floor reserved holes and ventilation piping, pipe shaft, chimney, garbage road location, size and practice index, as well as the wall (mainly filled wall, bearing masonry walls) reserved hole location, size and height or height etc.; Parking spaces and routes in the i. garage; J. dimensions required for civil construction; K. outdoor ground elevation, ground floor elevation, floor elevation and basement elevation; L. tangent location and number (usually only at the bottom plane or the plane position where the cutting is needed); M. quotes about plane nodes, detailing or details; N, a compass (painted on the ground floor); O. each floor of the fire floor area and fire zone separation location (should be a separate map, such as a fire zon