Design and Application of Main-Frequency Inductive Coil 工频感应 .PDF

Advances in Energy and Power Engineering 电力与能源进展, 2013, 1, 152-157 /10.12677/aepe.2013.15026 Published Online December 2013 (/journal/aepe.html) Design and Application of Main-Frequency Inductive Coil 1 2 3 Guixi Jia , Chol SonU , Hyonchol O 1Electrical Engineering Automation of Tianjin University, Tianjin 2Pyongyang Mechanical Engineering University, Pyongyang, North Korea 3Kim Chaek Industrial University, Pyongyang, North Korea Email: jiaguixi@126.com, SONUCHOL923@126.com, WXZ201309@126.com Received: Dec. 2nd th th , 2013; revised: Dec. 12 , 2013; accepted: Dec. 19 , 2013 Copyright © 2013 Guixi Jia et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unre- stricted use, distribution, and reproduction in any medium, provided the original work is properly cited. In accordance of the Creative Commons At- tribution License all Copyrights © 2013 are reserved for Hans and the owner of the intellectual property Guixi Jia et al. All Copyright © 2013 are guarded by law and by Hans as a guardian. Abstract: This paper will introduce an inductive coil design method using main-frequency that will improve efficiency. The heat treatment process has many advantages, such as low initial investment; affordable equipment, eco friendly, mechanized process control and production arrangement. Steel heating can be used for the production of numerous goods including plastic and rubber processing. This paper contains in-depth research concerning inductive coil design that highlights the different specific rate of work on the steel cylinder