车库门遥控器的配码(国外英文资料).docVIP

车库门遥控器的配码(国外英文资料) Code for garage door remote control: I. Shipley Te: (S60) Yes, [5P] + - P 000 (1) press the P button for about 3 seconds, LED digital tube flashing display 1, release the button. (2) press the P key 4 - 5, when LE appears, press + key, and when L occurs, the code will be studied. (3) with the red key of the remote control, press the button quickly for 4 times. (double-click 2 first, then double-click 2) (4) remote control is available after the code is waiting for the 5P to appear again. Remember: in the operation, the screen should not be confused by + - - key, otherwise, the garage door can not be used!!! Two, master: After the back cover is opened, the board has: remote control key, to the code key, press the study directly. Three, hoth: Press the S button outside to study. Four, Wright: There is a button in the back of the motor or in the lampshade. Click on to study. Five, jiahe: K1 K2 K3 K4 O, O, O, O (press the K1 key or K4 key, and other keys do not move.) Six, master of the old and new remote learning method 1: after the motor, there is a red button to press, and then press the remote control. Learning success. 2: there are three buttons, P and +- Press the P button first, and when the red dot appears on the LED, press the upper or lower key of the remote control Seven, the old superlift: The motor is opened on the side and has a press button to learn by clicking on it. Eight, ideal, kinglight, chibao, Mori Ma, Chang Shun, new aonuo: Learning is using the learning button in the motor to study. Nine. American horse: The early motor had a large green button behind it to learn by pressing it. (press new remote two) Now there is a red button behind the motor, which is pressed for study. (press new remote two) Ten, soma learning style: Press the P button, the four indicator light 7, and then press + light 7, often light. At this time, according to match the remote control, any key, two seconds indicator light 7 flashing, press the P key to save