IN-FLOWCTA-Bronkhorst详解.pdf

IN-FLOWCTA Industrial Mass Flow Meters and Controllers for Gases Introduction Bronkhorst High-Tech B.V., the European market leader in thermal Mass Flow Meters/Controllers and Electronic Pressure Controllers, has many years of experience in designing and manufacturing precise and reliable measurement and control devices. With a wide range of instruments and offering innovative solutions for many different applications in a variety of different markets, Bronkhorst High-Tech is dedicated to customer satisfaction, quality and sustainability. IN-FLOWCTA series for industrial applications The Mass Flow Meters and Controllers of the IN-FLOWCTA series are of rugged design (IP65) for use in pilot and production plants in industrial environments. The instruments operate on the principle of direct thermal mass flow measurement (no by-pass) and have no moving parts and no obstructions to the flow path. These features make IN-FLOWCTA Mass Flow Meters ideal for low pressure drop applications and for the use on wet or dirty gases. Another advantage of using this type of sensor is that the instruments measure direct mass flow, without the need of temperature and pressure correction. Mass Flow Meters can be supplied in ranges starting from 10…200 General IN-FLOWCTA features ml /min up to 50…5000 l /min Air-equivalent. Mass Flow Control uVirtually pressure and temperature independent n n loops can be offered, up to 4…200 ln/min Air-equivalent as flow meter uLow pressure drop with integrated control valve and up to 5000 ln/min with separate uWeatherproof IP65 housing control valve. uOptional: ATEX approval Cat.3, Zone 2 uVirtually insensitive to moisture or parti