斯特林发电机原理（国外英文资料）.docVIP

斯特林发电机原理（国外英文资料） Edit this paragraph] brief introduction The priest ROM bart Stirling engine is London (Robert Stirling) invented in 1816, so named Stirling engine (Stirling engine). The Stirling engine is a unique engine, because their theoretical efficiency is almost equal to the maximum efficiency of the theory, which is called the carnot cycle efficiency. The Stirling engine is powered by heat expansion of gas and cold compression. This is a kind of external combustion engine, continuously make the fuel combustion, the expansion of the evaporation of hydrogen or helium as power gas piston movement, expanding gas cooling in air conditioning room, repeatedly in the circulation process. [editor this paragraph] external combustion gas turbine is a kind of external fire outside the closed cycle reciprocating piston heat engine, different from relying on internal combustion engine fuel in internal combustion engine power. The new type of external combustion engine USES hydrogen as the industrial material, filling up a certain volume of work in four enclosed cylinders. At one end of the cylinder is a heat chamber, and the other end is a cold cavity. The work is compressed in the cryogenic cavity and then flows to the hot chamber to heat quickly and expand the work. The fuel is burning in the combustion chamber outside the cylinder, passing the heater to the work quality, not directly participating in the combustion and not replacing. [editor this paragraph] external combustion advantages and disadvantages Due to external combustion avoids the traditional internal combustion engine blast work problems, so as to realize the high efficiency, low noise, low pollution and low running cost. External combustion can burn various combustible gases, such as natural gas, methane, liquefied petroleum gas (LPG), hydrogen gas, gas, etc., can also be burning diesel oil, liquid fuels such as liquefied petroleum gas, also can burn wood, as well as the use of solar energy and so on. As