打印机面板（国外英文资料）.docVIP

打印机面板（国外英文资料） EPSONs large surface control panel is controlled in both English and Chinese Epson7800/9800 Chinese and English control information The READY printer is READY to print the data. The PRINTING printer is processing the data. Waiting for the INK dry INK DRYING printer. PAUSE printer pauses. The Displays EPSON logo and progress bar printer are ready to print. CUTTING PAPER PLEASE WAIT the printer is cutting the paper. PLEASE WAIT until you have a READY (READY) message. CLEANING PLEASE WAIT for the printer to clean the ink pipes. PRESS PAUSE BUTTON presses the PAUSE BUTTON. The CHARGING INK printer is filling INK with INK. RESETTING The PLEASE WAIT printer is reset. Wait a moment. The UPDATING FIRMWARE printer is UPDATING the FIRMWARE. The FIRMWARE UPDATE COMPLETE printer completes the FIRMWARE UPDATE. POWER OFF UNABLE TO PRINT MAKE SURE PAPER IS LOADED Explanation: errors may occur when trying to print a pattern (for example, a nozzle check or a print head calibration). Solution: first, end the TEST PRINT menu and resolve the errors displayed on the LCD screen. Finally, try to print the pattern again. Information: MAINTENANCE TANK NEARLY FULL Explanation: the maintenance box is full. Solution: replace a new maintenance box. Information: INK LOW, Explanation: the ink box is nearly empty. While INK LOW can continue to print, it may reduce print quality. Solution: you need to change ink cartridges soon. Information: the MAINTENANCE REQUEST NNNN Note: the parts in the printer are already close to the service life. NNNN stands for part code. Information: PAPER LOW, Note: the paper is running out of paper. Solution: replace the new roll paper. See using roll paper. Information: POWER CLEANING YOU MUST MOVE INK LEVERS WHEN CLEANING Explanation: the printing head should be deeply cleaned. Solution: perform deep cleaning and select YES (YES) based on the information of the LCD screen. Information: CLEANING the ERROR REMOVE THICK PAPER Description: it cannot be clea