打印机设备故障代码（国外英文资料）.docVIP

打印机设备故障代码（国外英文资料） Konica minolta bizhub 211 maintenance failure code interpretation (digest) Author: tanmon01 release time: 2010-07-05, 23:01:40 Konica minolta bizhub 211 failure code list The following information is taken from the Internet Fault code failure name detection sequence C0000 main motor failure ? After the transmission motor has been set, the transmission motor lock signal setting is still H. C0010 imaging unit motor failure ? After the operation of the imaging unit motor, the setting of the imaging unit motor lock signal is still H. ? After the imaging unit motor ceases to function, the image is made The unit motor locks the signal Settings for L. C0044 EDH fan motor failure? For more information about the purchase items, please refer to the maintenance manual. C0045 cooling fan failure ? After the cooling fan motor operates, the cooling fan motor locks the signal setting for H. ? The cooling fan motor locks the signal setting for L when the cooling fan motor stops and is set. C004E power unit cooling fan failure ? After the cooling fan motor runs in the power unit, the power unit cooling fan motor lock signal setting is still H. ? The power unit cooling fan motor locks the signal setting for L when the power unit cooling fan motor stops running. C004F IU cooling fan failure ? The I/U cooling fan motor locks the signal setting for H after the I/U cooling fan motor has been set. ? The I/U cooling fan motor locks the signal setting for L when the I/U cooling fan motor stops running. C0214 image transfer voltage exception ? The image transfer voltage is over 100 volts during the period after the unit motor is stopped. C0500 Fixing preheating Failure (main) ? In the first 30 seconds after the preheating cycle, the fixing roll thermistor fails to detect the required temperature, so the machine fails to complete the preheating cycle. ? During the preheating cycle, the temperature of the fixing roller is still not up to the required level even after the set