ES变频器调试指导说明（国外英文资料）.docVIP

ES变频器调试指导说明（国外英文资料） ES converter debugging instructions Summary: The ES converter is a high-performance drive made by Emerson CT, which is suitable for synchronous motor and asynchronous motor, with gear towing machine and no gear towing machine. Has unique superiority in matching synchronous machine: first, the speed of the drive optimization control mode, strengthen the function of flexible design and calculation of S curve, prevent the elevator in the process of start stop, increase the comfort of the elevator; The accurate distance control mode, the implementation of the direct docking, calculates the operation speed according to the running distance automatically, the efficiency is higher, the flat layer is more accurate, the debugging is more intelligent. Second, drive servo and zero torque compensation function, enhance the dynamic response of the elevator starting moment, make start there will be no slip, improve the start performance of the elevator and comfort; The optimized running curve function simplifies the control of the elevator, automatically calculates the speed curve by the same reduction distance, automatically differentiates the single and multi-layer operation. Again, all the converters have small built-in EMC filters and brake units that apply to the needs of various applications and elevators. One. The wiring instructions L1, L2, L3, input for the input for the converter U, V, W, for the output of the converter DC2, BR for brake resistance 3, 5, 6, the analog quantity 22, (24V user power) COM4 24, the (digital input/output 1) converter runs the signal input 25, (digital input output 2) multiple speed 1 26, (digital input output 3) multiple speed 2 27, (digital input 4) is turning 28, (digital input 5) reverse 29, (digital input 6) multiple speed 3 31, (the safe zone USES the end) to signal 41, the output of the converter failure Two. The wiring instructions for the encoder 1 (B - 3b), 2 (B + 4a), 3 (A + 2a), 4 (A minus 5b), 5 (DATA 6b), 6 (D