c220开局步骤（国外英文资料）.docVIP

c220开局步骤（国外英文资料） Zte C220 can use serial port at the first start, use a super terminal to log in and suggest using SCRT. The serial port rate is 9600, no flow control. The default user name and password are all zte. While the enable password for zxr10. - Step 1, modify the systems default time for the current time, and the command format is as follows: ZXAN# show clock ZXAN# clock set 14:58:00 oct 30 2009 setting time, note: oct (October) 30 (date) 2009 (year) Step 2, modify the device name, which is the host name. ZXAN# config terminal ZXAN (config) # hostname BA - JUZHI -c220-1 note format: BA_ is named _zing-c200 Step 3: add frame, frame, plate, and board. Note: this step can be omitted, and the general C220 has already added this information to the end of the factory and can be viewed using show runn. ZXAN (config) # show card to view the configured board, 1, 2 slot EPFC 6 or 9 is EIG sells its type or EIGM notice board and slot to be consistent with the actual configuration ZXAN (config) # Add rack rackno 0 racktype ZXPON: add a rack Add - shelf shelfno 0 shelftype zxa10c220-b added frame Add - card rackno shelfno slotno 1 0 0 EPFC add shenyang unicom OLT PON board only commonly in 1, 2, added two PON board slot Add card rackno 0 shelfno 0 slotno 2 EPFC Add - card rackno 0 shelfno 0 slotno 13 EIG Add - card shelfno rackno 0 0 slotno 14 EIG sells its part add board EIG sells its light (4) general in 13 or 14 slots Format: rack machine shelf frame slot, shenyang unicom is 0 frame 0 frame (from 0 to the first frame in the cabinet) ZXAN (config) # del - card slotno 6 6 is slot number deleted slot of the board If the plate type or slot error Need to delete the add ZXAN# reboot (system restart) Step 4, add vlan in batch C220 (add ONU management, narrowband, broadband business vlan) ZXAN (config) # vlan database ZXAN (vlan) # vlan 100-101,200 manages VLAN101, business vlan200, voice vlan100 ZXAN (vlan) # exit Note: you can add description information in these vlans an