选线软件用户手册(具体步调)(国外英文资料).docVIP

选线软件用户手册(具体步骤)(国外英文资料) 8, generate plane Choose refresh plane tools, and then double-click the package name, jump out of a choice style dialog box, select new line construction drawing design, click open, then click OK, the plane line are created. 9, staff In the left margin to find the content of the need in the profile, select, and then click the button to the right, in accordance with the order to right a border, click save button, and then ok 10, 2002 to set up a CAD (note: some computer Windows within the plane of drawing directly, click new probably wont open, if that happens, you can double-click the desktop CAD 2002 button, to open a CAD. 11, draw profile Choose the open project button, find the saved extension. Along the file open, then select draw profile button, a dialog box appears, select the solution, click OK, will appear standard longitudinal profile. 12, grade Select the slope button, enter the specific data, the starting point needs to enter the height, and the slope program is automatically calculated. Note that the starting point needs to enter the range, slope, slope length, vertical curve and elevation, and other slope segments only need input slope, slope length and vertical curve. Other operations with flat data. Choose the redraw gradient button, and the gradient line appears in the longitudinal section Choose the station button, enter the stations content, click the save button, and then make sure The large bridge table, the bridge and the tunnel Select the corresponding button and enter the correct mileage information When entering the hole, click the list box on the right to add or modify the beam. When the hole span needs to be marked in multiple lines, press CTRL + enter at the change line. When the bridge is a double or three-wire bridge, you need to enter the left or right spacing. The left and right spacing refers to the line spacing between the most lateral lines of the bridge and the base line. In the CAD of the longitudinal secti