KX驱动几个基础插件简介(国外英文资料).docVIP

KX驱动几个基本插件简介(国外英文资料) sequence At the beginning of the article written, this wants to proposition textbook 2 words, but with the deepening of the article, the more feel know more is insufficient, cant dubbed teaching material. This paper mainly introduces the basic function of a few commonly used plug-in, there is no technical content, but hope that through this a few of the plug-in profile deepen everyones understanding of KX drivers, provide some resources for introduction of KX users, to provide the best to correct a few paragraphs The SRC SRC is an important input source plug-in for KX, which is responsible for selecting and controlling all audio sources that are entered by Windows into the sound card (including the audio source input from the child card and the external box). There are multiple port options in the SRC: FXBus0 ~ 31 (SB for 0 ~ 15), and the sound source of a few sub-cards and external box input. In general applications, we will find that Windows systems and most applications only map out the ports of 0/1, 4/5, 6/7, 8/9, HQ (SB and A1 without HQ). Other ports are typically only available in professional audio software. The output port of the application will be correctly spoken with the input port set by the SRC. If the Windows system defaults to FXBus 0/1, the DSP must have a SRC set to FXBus 0/1 to receive the systems voice and send it to the back. Normally we would use a different port to send different sounds, such as system with 0/1, Foobar with 4/5, then the DSP will bring up the two SRC set to 0/1 and 4/5 respectively to different sounds. When using an ASIO output play, also through the SRC into DSP signal, usage and above in WDM, but there are several different: 1, an ASIO can generally get lower latency (small, this meant to play behind the function of recording). The ASIO channel is exclusive, a port can only be played by one player. 3, an ASIO only under a certain sampling rate at the same time playback and recording, an ASIO in the con